The main functionalities provided by `afex`

are:

- Interfaces for estimating standard ANOVAs with any number or
combination of within-subjects or between-subjects variables (the ANOVA
functions are
`aov_car()`

,`aov_ez()`

, and`aov_4()`

which all fit the same model but differ in the way to specify the ANOVA model). - Function
`mixed()`

provides an interface for mixed models analysis (estimated via`lme4`

`lmer`

or`glmer`

) that automatically obtains*p*-values for fixed effects model terms (i.e., main effects and interactions). `afex_plot()`

visualizes results from factorial experiments combining estimated marginal means and uncertainties associated with the estimated means in the foreground with a depiction of the raw data in the background.

- All
`afex`

model objects (i.e., ANOVA and mixed models) can be passed to`emmeans`

for follow-up/post-hoc/planned contrast analysis.

For `afex`

support visit: afex.singmann.science

`afex`

is available from CRAN so the current stable version can be installed directly via:`install.packages("afex")`

To install the latest development version you will need the

`devtools`

package:`devtools::install_github("singmann/afex@master")`

To calculate an ANOVA, `afex`

requires the data to be in
the long format (i.e., one row per data point/observation). An ANOVA can
then be calculated via one of three functions that only differ in how
the model components are specified, but not in the output. Note that in
contrast to base `lm`

or `aov`

, `afex`

ANOVA functions always require the specification of a subject identifier
column (the id-column), because in case there are multiple observations
per participant and cell of the design, these multiple observations are
aggregated (i.e., averaged) per default.

- In
`aov_ez`

the columns containing id variable, dependent variable, and factors need to be specified as character vectors. `aov_car`

behaves similar to standard`aov`

and requires the ANOVA to be specified as a formula containing an`Error`

term (at least to identify the id variable).`aov_4`

allows the ANOVA to be specified via a formula similar to`lme4::lmer`

(with one random effects term).

A further overview is provided by the vignette.

The following code provides a simple example for an ANOVA with both
between- and within-subject factors. For this we use the
lexical-decision and word naming latencies reported by Freeman,
Heathcote, Chalmers, and Hockley (2010), see also
`?fhch2010`

. As is commonly done, we use the natural
logarithm of the response times, `log_rt`

, as dependent
variable. As independent variable we will consider the between-subjects
factor `task`

(`"naming"`

or
`"lexdec"`

) as well as the within-subjects-factors
`stimulus`

(`"word"`

or `"nonword"`

)
and `length`

(with 3 levels, 3, 4, or 5 letters).

```
library("afex")
# examples data set with both within- and between-subjects factors (see ?fhch2010)
data("fhch2010", package = "afex")
<- fhch2010[ fhch2010$correct,] # remove errors
fhch str(fhch2010) # structure of the data
#> 'data.frame': 13222 obs. of 10 variables:
#> $ id : Factor w/ 45 levels "N1","N12","N13",..: 1 1 1 1 1 1 1 1 1 1 ...
#> $ task : Factor w/ 2 levels "naming","lexdec": 1 1 1 1 1 1 1 1 1 1 ...
#> $ stimulus : Factor w/ 2 levels "word","nonword": 1 1 1 2 2 1 2 2 1 2 ...
#> $ density : Factor w/ 2 levels "low","high": 2 1 1 2 1 2 1 1 1 1 ...
#> $ frequency: Factor w/ 2 levels "low","high": 1 2 2 2 2 2 1 2 1 2 ...
#> $ length : Factor w/ 3 levels "4","5","6": 3 3 2 2 1 1 3 2 1 3 ...
#> $ item : Factor w/ 600 levels "abide","acts",..: 363 121 202 525 580 135 42 368 227 141 ...
#> $ rt : num 1.091 0.876 0.71 1.21 0.843 ...
#> $ log_rt : num 0.0871 -0.1324 -0.3425 0.1906 -0.1708 ...
#> $ correct : logi TRUE TRUE TRUE TRUE TRUE TRUE ...
```

```
# estimate mixed ANOVA on the full design:
aov_ez("id", "log_rt", fhch, between = "task", within = c("stimulus", "length"))
aov_car(log_rt ~ task * stimulus * length + Error(id/(stimulus * length)),
data = fhch)
## equivalent: aov_car(log_rt ~ task + Error(id/(stimulus * length)), data = fhch)
aov_4(log_rt ~ task * stimulus * length + (stimulus * length|id), data = fhch)
## equivalent: aov_4(log_rt ~ task + (stimulus * length|id), data = fhch)
# the three calls return the same ANOVA table:
```

```
#> Warning: More than one observation per design cell, aggregating data using `fun_aggregate = mean`.
#> To turn off this warning, pass `fun_aggregate = mean` explicitly.
#> Contrasts set to contr.sum for the following variables: task
#> Anova Table (Type 3 tests)
#>
#> Response: log_rt
#> Effect df MSE F ges p.value
#> 1 task 1, 43 0.23 13.38 *** .221 <.001
#> 2 stimulus 1, 43 0.01 173.25 *** .173 <.001
#> 3 task:stimulus 1, 43 0.01 87.56 *** .096 <.001
#> 4 length 1.83, 78.64 0.00 18.55 *** .008 <.001
#> 5 task:length 1.83, 78.64 0.00 1.02 <.001 .358
#> 6 stimulus:length 1.70, 72.97 0.00 1.91 <.001 .162
#> 7 task:stimulus:length 1.70, 72.97 0.00 1.21 <.001 .298
#> ---
#> Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '+' 0.1 ' ' 1
#>
#> Sphericity correction method: GG
```

`afex_plot`

ANOVA models can be used for plotting via `afex_plot`

:

```
<- aov_ez("id", "log_rt", fhch, between = "task", within = c("stimulus", "length"))
a #> Warning: More than one observation per design cell, aggregating data using `fun_aggregate = mean`.
#> To turn off this warning, pass `fun_aggregate = mean` explicitly.
```

```
afex_plot(a, "task", "stimulus", "length")
#> Warning: Panel(s) show a mixed within-between-design.
#> Error bars do not allow comparisons across all means.
#> Suppress error bars with: error = "none"
```

`afex_plot`

returns a `ggplot2`

plot object
which allows simple customization:

```
library("ggplot2")
afex_plot(a, "task", "stimulus", "length") +
theme_bw()
#> Warning: Panel(s) show a mixed within-between-design.
#> Error bars do not allow comparisons across all means.
#> Suppress error bars with: error = "none"
```

`emmeans`

Follow-up tests with `emmeans`

need to be specified in two
steps.

- Decide which factors of model should be involved in tests. Use these
factors to set-up reference grid of marginal means using
`emmeans()`

. - Specify set of tests on reference grid from step 1. Either custom
contrasts as a
`list`

and using`contrast()`

or a convenience function such as`pairs()`

.

```
library("emmeans")
## set up reference grid using only length
<- emmeans(a, "length")
em1
em1#> length emmean SE df lower.CL upper.CL
#> X4 -0.1087 0.0299 43 -0.169 -0.04834
#> X5 -0.0929 0.0296 43 -0.153 -0.03310
#> X6 -0.0653 0.0290 43 -0.124 -0.00679
#>
#> Results are averaged over the levels of: task, stimulus
#> Confidence level used: 0.95
## test all pairwise comparisons on reference grid:
pairs(em1)
#> contrast estimate SE df t.ratio p.value
#> X4 - X5 -0.0159 0.00768 43 -2.065 0.1092
#> X4 - X6 -0.0434 0.00782 43 -5.555 <.0001
#> X5 - X6 -0.0276 0.00602 43 -4.583 0.0001
#>
#> Results are averaged over the levels of: task, stimulus
#> P value adjustment: tukey method for comparing a family of 3 estimates
## only test specified tests
<- list(
con "4vs5" = c(-1, 1, 0),
"5vs6" = c(0, -1, 1)
)contrast(em1, con, adjust = "holm")
#> contrast estimate SE df t.ratio p.value
#> 4vs5 0.0159 0.00768 43 2.065 0.0449
#> 5vs6 0.0276 0.00602 43 4.583 0.0001
#>
#> Results are averaged over the levels of: task, stimulus
#> P value adjustment: holm method for 2 tests
```

Function `mixed()`

fits a mixed model with
`lme4::lmer`

(or `lme4::glmer`

if a
`family`

argument is passed) and then calculates
*p*-values for fixed effects model terms using a variety of
methods. The formula to `mixed`

needs to be the same as in a
call to `lme4::lmer`

. The default method for calculation of
*p*-values is `'S'`

(Satterthwaite) which only works
for linear mixed models (i.e., no `family`

argument). A
similar method that provides a somewhat better control of Type I errors
for small data sets is `'KR'`

(Kenward-Roger), but it can
require considerable RAM and time. Other methods are , similar to
`'KR'`

but requires less RAM), `'PB'`

(parametric
bootstrap), and `'LRT'`

(likelihood-ratio test).

More examples are provided in the vignette,
here we use the same example data as above, the lexical decision and
word naming latencies collected by Freeman et al. (2010). To avoid long
computation times we only consider the two factors `task`

and
`length`

(omitting `stimulus`

is probably not a
fully sensible model). Because mixed models easily allow it, we will
consider crossed-random effects for participants (`id`

) and
items (`tem`

).

```
library("afex")
# examples data set with both within- and between-subjects factors (see ?fhch2010)
data("fhch2010", package = "afex")
<- fhch2010[ fhch2010$correct,] # remove errors
fhch str(fhch2010) # structure of the data
#> 'data.frame': 13222 obs. of 10 variables:
#> $ id : Factor w/ 45 levels "N1","N12","N13",..: 1 1 1 1 1 1 1 1 1 1 ...
#> $ task : Factor w/ 2 levels "naming","lexdec": 1 1 1 1 1 1 1 1 1 1 ...
#> $ stimulus : Factor w/ 2 levels "word","nonword": 1 1 1 2 2 1 2 2 1 2 ...
#> $ density : Factor w/ 2 levels "low","high": 2 1 1 2 1 2 1 1 1 1 ...
#> $ frequency: Factor w/ 2 levels "low","high": 1 2 2 2 2 2 1 2 1 2 ...
#> $ length : Factor w/ 3 levels "4","5","6": 3 3 2 2 1 1 3 2 1 3 ...
#> $ item : Factor w/ 600 levels "abide","acts",..: 363 121 202 525 580 135 42 368 227 141 ...
#> $ rt : num 1.091 0.876 0.71 1.21 0.843 ...
#> $ log_rt : num 0.0871 -0.1324 -0.3425 0.1906 -0.1708 ...
#> $ correct : logi TRUE TRUE TRUE TRUE TRUE TRUE ...
```

For the random-effects grouping factors we begin with the maximal
random effect structure justified by the design (see Barr, Levy,
Scheepers, & Tily, 2013). In this case this is by-subject random
intercepts and by-subjects random slopes for `stimulus`

and
by-item random intercepts and by-item random slopes for
`task`

.

```
<- mixed(log_rt ~ task * length + (length | id) + (task | item),
m1
fhch)#> Contrasts set to contr.sum for the following variables: task, length, id, item
#> boundary (singular) fit: see help('isSingular')
```

Fitting this model produces a critical convergence warning, that the fit is singular. This warning usually indicates that the data does not provide enough information for the request random effect parameters. In a real analysis it would therefore be a good idea to iteratively reduce the random effect structure until the warning disappears. A good first step would be to remove the correlations among random effect terms as shown below.

This warning is also shown if we simply print the model object, but
not if we call the `nice()`

method.

```
m1#> Warning: lme4 reported (at least) the following warnings for 'full':
#> * boundary (singular) fit: see help('isSingular')
#> Mixed Model Anova Table (Type 3 tests, S-method)
#>
#> Model: log_rt ~ task * length + (length | id) + (task | item)
#> Data: fhch
#> Effect df F p.value
#> 1 task 1, 44.80 13.47 *** <.001
#> 2 length 2, 325.78 6.03 ** .003
#> 3 task:length 2, 303.23 0.33 .722
#> ---
#> Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '+' 0.1 ' ' 1
nice(m1)
#> Mixed Model Anova Table (Type 3 tests, S-method)
#>
#> Model: log_rt ~ task * length + (length | id) + (task | item)
#> Data: fhch
#> Effect df F p.value
#> 1 task 1, 44.80 13.47 *** <.001
#> 2 length 2, 325.78 6.03 ** .003
#> 3 task:length 2, 303.23 0.33 .722
#> ---
#> Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '+' 0.1 ' ' 1
```

If we call the `anova()`

method a slightly different
output is shown in which the p-values are not rounded in the same way
and the warning is shown again.

```
anova(m1)
#> Warning: lme4 reported (at least) the following warnings for 'full':
#> * boundary (singular) fit: see help('isSingular')
#> Mixed Model Anova Table (Type 3 tests, S-method)
#>
#> Model: log_rt ~ task * length + (length | id) + (task | item)
#> Data: fhch
#> num Df den Df F Pr(>F)
#> task 1 44.797 13.4692 0.0006426 ***
#> length 2 325.775 6.0255 0.0026940 **
#> task:length 2 303.227 0.3263 0.7218472
#> ---
#> Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
```

We can also get the default `lme4`

output if we call the
`summary`

method. However, note that in contrast to the
previous methods, results are shown for factor-levels and not
model-terms which is usually not interpretable for factors with more
than two levels. This is the case for `length`

here. The
problem is that factors with \(k\)
levels are mapped to \(k-1\) parameters
and at the same time the intercept represent the (unweighted) grand
mean. This means that factor-levels cannot be mapped in a 1-to-1 manner
to the parameters and thus cannot be uniquely interpreted.

```
summary(m1)
#> Linear mixed model fit by REML. t-tests use Satterthwaite's method [
#> lmerModLmerTest]
#> Formula: log_rt ~ task * length + (length | id) + (task | item)
#> Data: data
#>
#> REML criterion at convergence: 7624.2
#>
#> Scaled residuals:
#> Min 1Q Median 3Q Max
#> -5.9267 -0.5900 -0.1018 0.4789 5.2673
#>
#> Random effects:
#> Groups Name Variance Std.Dev. Corr
#> item (Intercept) 0.0115702 0.10756
#> task1 0.0104587 0.10227 0.47
#> id (Intercept) 0.0374050 0.19340
#> length1 0.0003297 0.01816 0.16
#> length2 0.0001009 0.01005 0.11 -0.96
#> Residual 0.0925502 0.30422
#> Number of obs: 12960, groups: item, 600; id, 45
#>
#> Fixed effects:
#> Estimate Std. Error df t value Pr(>|t|)
#> (Intercept) -0.089098 0.029468 44.989068 -3.024 0.004117 **
#> task1 -0.108035 0.029437 44.797243 -3.670 0.000643 ***
#> length1 -0.020756 0.007810 226.902599 -2.658 0.008425 **
#> length2 -0.003746 0.007467 380.122063 -0.502 0.616214
#> task1:length1 0.005719 0.007569 206.633789 0.756 0.450736
#> task1:length2 -0.004627 0.007214 353.115359 -0.641 0.521661
#> ---
#> Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
#>
#> Correlation of Fixed Effects:
#> (Intr) task1 lngth1 lngth2 tsk1:1
#> task1 0.118
#> length1 0.056 0.007
#> length2 0.021 0.002 -0.526
#> tsk1:lngth1 0.007 0.058 0.329 -0.173
#> tsk1:lngth2 0.003 0.022 -0.174 0.349 -0.528
#> optimizer (nloptwrap) convergence code: 0 (OK)
#> boundary (singular) fit: see help('isSingular')
```

Because of the singular fit warning, we reduce the random effect
structure. Usually a good starting point is removing the correlations
among the random effects parameters. This can be done in
`afex::mixed`

even for factors by combining the double bar
notation `||`

with `expand_re = TRUE`

. We do so
for both random effects terms.

```
<- mixed(log_rt ~ task * length + (length || id) + (task || item),
m2 expand_re = TRUE)
fhch, #> Contrasts set to contr.sum for the following variables: task, length, id, item
#> boundary (singular) fit: see help('isSingular')
```

However, the singular fit warning remains. We therefore inspect the random effect estimates to see which random effect parameter is estimated to be near to zero.

```
summary(m2)$varcor
#> Groups Name Std.Dev.
#> item re2.task1 1.0119e-01
#> item.1 (Intercept) 1.0685e-01
#> id re1.length2 3.1129e-06
#> id.1 re1.length1 1.2292e-02
#> id.2 (Intercept) 1.9340e-01
#> Residual 3.0437e-01
```

As shown above, one parameter of the by-participant random slope for
`length`

is estimated to be almost zero,
`re1.length2`

. We therefore remove the by-participant random
slope for `length`

in the next model which does not show any
convergence warnings.

```
<- mixed(log_rt ~ task * length + (1 | id) + (task || item),
m3 expand_re = TRUE)
fhch, #> Contrasts set to contr.sum for the following variables: task, length, id, item
m3#> Mixed Model Anova Table (Type 3 tests, S-method)
#>
#> Model: log_rt ~ task * length + (1 | id) + (task || item)
#> Data: fhch
#> Effect df F p.value
#> 1 task 1, 44.74 13.52 *** <.001
#> 2 length 2, 597.20 6.67 ** .001
#> 3 task:length 2, 592.82 0.40 .668
#> ---
#> Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '+' 0.1 ' ' 1
```

`afex_plot`

Objects returned by `mixed`

can be used for plotting with
`afex_plot`

. However, two things need to be considered.

- The
`id`

argument of`afex_plot`

allows specifying over which random effects grouping factors the data plotted in the background should be averaged over. Per default this uses all random effects grouping factors. In the present case this would mean that all data points are shown resulting in a very busy plot. When choosing only one of the random effects grouping factor, data points in the background show average response for each level of that factor. For example, when setting`id = "id"`

here each data point in the background shows the mean`log_rt`

of one participant (i.e., level of`id`

). - Estimated marginal means in the foreground are estimated via
`emmeans`

which per default attempts to estimate the degrees of freedom using the expensive Kenward-Roger method unless the number of data points is high (as here). This can produce quite some status messages (not shown here). Use`emmeans::emm_options(lmer.df = "asymptotic")`

to suppress this calculation.

```
library("ggplot2")
## all data points shown
afex_plot(m3, "task", "length") +
theme_bw()
```

```
## data points show IDs
afex_plot(m3, "task", "length", id = "id") +
theme_bw()
```

```
## data points show items
afex_plot(m3, "task", "length", id = "item") +
theme_bw()
```

`emmeans`

Follow-up tests with `emmeans`

need to be specified in two
steps.

- Decide which factors of model should be involved in tests. Use these
factors to set-up reference grid of marginal means using
`emmeans()`

. - Specify set of tests on reference grid from step 1. Either custom
contrasts as a
`list`

and using`contrast()`

or a convenience function such as`pairs()`

.

For mixed models, `emmeans`

attempts to estimate the
degrees of freedom. The method can be set via
`emm_options(lmer.df = ...)`

. Here we use
`"asymptotic"`

which does not estimate the degrees of
freedom, but sets them to infinity.

```
library("emmeans")
emm_options(lmer.df = "asymptotic")
## set up reference grid using only length
<- emmeans(m3, "length")
em2 #> NOTE: Results may be misleading due to involvement in interactions
em2#> length emmean SE df asymp.LCL asymp.UCL
#> 4 -0.1099 0.0304 Inf -0.169 -0.05040
#> 5 -0.0924 0.0304 Inf -0.152 -0.03296
#> 6 -0.0642 0.0304 Inf -0.124 -0.00469
#>
#> Results are averaged over the levels of: task
#> Degrees-of-freedom method: asymptotic
#> Confidence level used: 0.95
## test all pairwise comparisons on reference grid:
pairs(em2)
#> contrast estimate SE df z.ratio p.value
#> length4 - length5 -0.0175 0.0126 Inf -1.384 0.3495
#> length4 - length6 -0.0457 0.0126 Inf -3.618 0.0009
#> length5 - length6 -0.0282 0.0126 Inf -2.238 0.0649
#>
#> Results are averaged over the levels of: task
#> Degrees-of-freedom method: asymptotic
#> P value adjustment: tukey method for comparing a family of 3 estimates
## only test specified tests
<- list(
con "4vs5" = c(-1, 1, 0),
"5vs6" = c(0, -1, 1)
)contrast(em2, con, adjust = "holm")
#> contrast estimate SE df z.ratio p.value
#> 4vs5 0.0175 0.0126 Inf 1.384 0.1665
#> 5vs6 0.0282 0.0126 Inf 2.238 0.0504
#>
#> Results are averaged over the levels of: task
#> Degrees-of-freedom method: asymptotic
#> P value adjustment: holm method for 2 tests
```

Barr, D. J., Levy, R., Scheepers, C., & Tily, H. J. (2013).
Random effects structure for confirmatory hypothesis testing: Keep it
maximal. *Journal of Memory and Language*, 68(3), 255-278. https://doi.org/10.1016/j.jml.2012.11.001

Freeman, E., Heathcote, A., Chalmers, K., & Hockley, W. (2010).
Item effects in recognition memory for words. *Journal of Memory and
Language*, 62(1), 1-18. https://doi.org/10.1016/j.jml.2009.09.004

Please note that `afex`

is released with a Contributor
Code of Conduct. By contributing to this project, you agree to abide
by its terms.